PNEUMATIC SELF-BALANCING MANIPULATOR WITH PNEUMATIC CONTROL
The Ergo-Help EHMP Manipulator isan ergonomic, material handling device which enables its operator to maneuver heavy loads with speed and
ease, assisted by pneumatic lifting force.
The in-line mounted control allows for direct manipulationof the load, turning the task of moving heavy items into a natural and effortless movement, with a near-zero learning curve requirement. This equates to marked decreases in worker fatigue and
injury, while greatly enhancing production efficiency, thus reducing costs and time.
The articulating arms & lifting cylinder assembly could be mounted on our floor post, or onto the customer's own platform, rail, or crane system. The components are overhead-mounted and low profile, allowing for a notable reduction in space requirments while increasing the
working envelope.
The standard EHMP Manipulator comes equipped with a lifting hook serving as the end tool. Air-powered end-effectors are available, as is custom-designed end tooling.
STANDARD MODEL: EHMP-120-60-0-30
Specs:
working envelope: 120" x 30"
power requirements: shop air, 60-120 psi
Standard:
articulating 2-arm assembly, 60" radius
3" bore, 30" stroke double-acting air cylinder
in-line control handle with pneumatic control
120 lb maximum load
end tooling: lifting hook
Options:
floor post
movable (mobile platform)
manual or air-powered end effectors (ie, magnets, grippers, vaccuum)
safety module: down-stroke force overload
safety module: unintentional load release
alternate working envelope specifications
alternate control handle configurations (ie, off-center to cylinder rod, two handles mounted in tandem, easy reach with counter-weight)
ARTICULATING ARMS FOR MANIPULATORS AND JIB CRANES
The standard EHMT Manipulator is equipped with a 2-arm swing assembly (model EHA-30S-30S, assembly pattern E), with a reach radius of 60", a maximum weight load of 120 lbs, and configuration for a top-mounted cylinder.
Reach, weight ratings, and assembly patterns for alternate mounting of cylinder and tooling could all be customized to your specs with other arm assembly configurations:
MODEL
ASS'Y
LENGTH
L (in)
ASS'Y
WEIGHT
(lbs)
MAX
LOAD
W.(lbs)
ASSEMBLY PATTERN
EHA-42HS-42HS
84
220.5
225
EHA-30HS-30HS
60
200.5
300
EHA-42HS-30S
72
149.5
240
EHA-30HS-30S
60
139.5
240
EHA-30S-30S
60
61
120
EHA-30S-30A
60
46.5
80
EHA-22 1/2S-22 1/2S
45
53
180
EHA-42HS-30S-30S
102
167.5
120
EHA-42HS-30S-30A
102
153
80
EHA-42HS-22.1/2S-22.1/2S
87
159.5
180
EHA-30HS-30S-30S
90
157.5
120
EHA-30HS-30S-30A
90
143
80
EHA-30HS-22 1/2S-22 1/2S
75
149.5
180
EHA-30S-30S-30A
90
74.5
50
EHA-42HS-30S-30S-30A
132
181
40
EHA-30HS-30S-30S-30A
120
171
45
COMPACT MOBILE MANIPULATOR PLATFORM WITH EXTENDING STABILIZING ARMS
The EHP-1 platform fits the bill when post-mounted manipulator requirements call for a mobile base, generally in applications where quick relocation of the unit is an essential specification.
Features:
(4) swivel casters, home position footprint: 40"x 40"
(4) manually adjustable stabilizing arms, footprint extension to max 104"x104"
leveling pads at each arm end, hand wheel-crank operated
Ergo-Help, Inc.|2466 E. Oakton St.|Arlington Heights, IL 60005|Tel:847-593-0722|Fax:847-593-0797|Email: info@ergo-help.net