Specs:

• push-button operation 
• power up/down locking air cylinder 
• vertical travel: 30" (other strokes available)
• end effector: rare-earth permanent magnet
• down-stroke overload safety module
• load release safety module
• application: flat or cylindrical ferrous loads
• load capacity: 300 lbs

 MANIPULATOR-MOUNTED

Material handler for inside core gripping and transfer of rolls while stacked vertically.  Gripping action provided by a steel mandrel gripper tooled with a saw-toothed pattern.  The gripper drops into the roll core and expands via pneumatic actuation to provide a reliable i.d. core grip of the roll, allowing for effortless transfer of the load with zero damage to the product. 

two standard models:

1. fixed-joint, EHMP Manipulator mounted (left photo)
2. flex-joint, monorail /crane mounted (right photo) which allows lateral positioning leeway from a straight-line overhead connection point. 

Both models come complete with a downstroke overload safety module to prevent topside crushing of the roll upon tool deployment , as well as a load release safety module which prevents accidental release of the load while in transfer.

MONORAIL-MOUNTED

Vacuum gripping device, developed for suction gripping, lifting, and transfer of nearly any flat, uniform material such as sheets of glass, cardboard, plastic, sheet metal, wood and laminate, etc. 

Off-center controls and low-profile, forward mounted grip tooling allow for easy maneuverability into restricted confines, ideal for punch press and mold applications.

Specs:

• working envelope: 136" reach x 30" vertical stroke (longer strokes available)
• max load: 80 lb
• load parameters:
  • min: 12" x 30"
  • max: 48" x 96"
• off-center load distance: 34"
• adjustable vacuum tool: 6 cups- 6 pumps (decentralized system)
• load release safety module
• downstroke overload safety module 
• power requirements: 110 VAC, shop air (min 85 psi)